Top Categories: Five-axis engraving machine, CNC machine for curved wood, Suzhou Apexcnc,apexcnc,bentwood cutting machine,CNC Saw,FRP Cutting machine,4 axis cnc router,cnc router machine,custom cnc machine,wood cutting machine

Custom machine

Custom machine

current location:Home > Products > Custom machine

High Z axis 3050 Wood mould cnc router machine for MDF plywood

Issuing time:2018-12-25 13:33:28Views:
Product name:High Z axis 3050 Wood mould cnc router machine for MDF plywood
Product Category:Custom machine

Product Description


The mesa structure is made of special steel plate tops of our factory, and the standard grade is 12.9. The bed base is made of high rigidity and high strength structure to ensure the accuracy and stability of the benchmark. Both the beam and the ram are equipped with an internationally advanced equal-forced security structure to reduce weight while ensuring sufficient strength.
The surface of the table is a steel T-slot.
* Transmission
The three axes are all made of Taiwan TBI high load TBI screw. HIWIN silver guide rail slider, standard ball flange type slider, high bearing capacity to improve stability and life. The machine is designed with double rails for increased speed and stability. Yaskawa servo motor drive, high torque and high performance, make the machining movement more smooth and stable, fully guarantee the cutting effect.
Taiwan's Tanjung mechanical spindle, the new generation of servo motor new generation drive high torque.

*Lubrication system
The automatic lubrication pump and the throttle valve can realize the centralized timing and uniform lubrication of the guide rail and the lead screw of the whole machine.
*Wireless handwheel system
Avoid too far from the work point in the tool point or observation point. It is convenient to observe and operate. The maximum remote control distance is 50 meters.
*Other configurations
The complete transmission part of the whole machine improves the service life and precision life of the transmission system.
The enclosed dustproof part is protected by a high quality organ cloth.
*Installation environment
1 temperature, indoor temperature should be between 3 ° C and 36 ° C.
2 Humidity, 75% or less (no condensation).
3 is not affected by external vibrations and electrical interference.
4 Avoid direct sunlight on the machine.
5 Avoid direct contact with outside wind, air and temperature regulation of cold and hot air.
6 Avoid setting heat sources such as heating near the machine.
7 The concentration of dust in the air shall not exceed 10mg/m3, and shall not contain acid, salt and other corrosive gases.
8 Avoid water leakage and water immersion.
9 power supply: 3 phase 380V ± 10%; 50Hz ± 1Hz.






Table Size



Traveling Positioning Accuracy



X,Y,Z Repositioning Accuracy



Table Surface

T-slot Combined



Welded Structure



Screw drive


Max. Power Consumption



Max. Rapid Travel Rate



Max. Working Speed



Spindle Power



Spindle Speed



Working Voltage

AC380V/50/60Hz,3PH (Option: 220V)

PS: All the working area and specifications can be customized according to your requests. 

Product Application



Our Services



24 months for the whole machine. Within 24 months under normal use and maintenance, if something is wrong with the machine, you will get spare part for free. Out of 24 months, you will get spare parts at cost price. You will also get technical support and service all the lifetime.


 After sales services:

Normal machine is properly adjusted before dispatch. You will be able to use the machine immediately after received machine.

Besides, you will be able to get free training advice towards our machine in our factory. You will also get free suggestion and consultation, technical support and service by email/fax/tel etc

Overseas service.jpg


About us


online service

Product Advisory
Click here to send me a message
Technical Support
Click here to send me a message
Sales 1
Sales 2